Categories
SHOWER HINGE
sliding shower door kit
  • Sliding Shower Door Kit
  • Sliding Shower Door Kit

EPDM Cold Shrink End Caps

Item No.: CS-EC
CS-EC series Cold Shrink End Caps environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. They are close-ended, tubular EPDM rubber sleeves that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage. They are easily installed and cleanly removable. Whether in transit from the manufacturer, stored in the cable yard, or in process in a trench, your cable ends are protected from exposure to moisture, contamination and corrosion.
INQUIRY

Cold Shrink End Caps CS-EC Series

Product Description

CS-EC series Cold Shrink End Caps environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes.

They are close-ended, tubular EPDM rubber sleeves that are factory expanded and loaded onto a removable core.  When positioned over

the end of a  cable, or

other cylindrical object, the core is removed to provide a reliable seal that protects your cable ends from environmental damage. 

They are easily installed and cleanly removable.  Whether in transit from the manufacturer, stored in the cable yard, or in process

 in  a trench, your cable ends are protected from exposure to

moisture, contamination and corrosion.  Four different end caps are available to accommodate a wide range of sizes.

Features

Simple and fast installation, no tools required.

Accommodates size ranges from 11mm – 84mm.

Good abrasion resistance.

Seals tight, retains resiliency and pressure even after

prolonged years of ageing and exposure.

Water-resistant.

No mastic or tape required.

No torches or heat required.

Resists fungus.

Resists acids and alkalis.

Resists ozone.

Easily removed.

No training required for installation.

Applications

The Cold Shrink CS-EC Series End Caps protect cables, pipes and other cylindrical objects from exposure to moisture, contamination,

corrosion, ozone, ultra-violet  radiation, physical contact and other environmental hazards.

Technical Data

Properties

Test Method

Standard Value

300% Modulus

ASTM D-412-75

4.2MPa

Ultimate Tensile

ASTM D-412-75

10.05MPa

Ultimate Elongation

ASTM D-412-75

600%

Tear strength

ASTM D-624C-73

28.3KN/m

Fungus Resistance

ASTM G-21

28 days exposure No Growth

Moisture Absorption 7 days@ 90in H2O

3.0% wt. Gain

Selection Chart

Product Nunber

Pre-Shrunk I.D. (Min) /mm

ShrunkWall Thickness  Nom/mm

Use  Range/mm

CS-EC1

Ø25

2.5

Ø11- Ø20

CS-EC2

Ø36

2.5

Ø15- Ø30

CS-EC3

Ø55

2.6

Ø26- Ø49

CS-EC4

Ø90

2.6

Ø45- Ø84

Installation

The Cold Shrink CS-EC Series End caps install quickly and cleanly without flame or grease.  Cold Shrink end caps are factory

expanded on removable inner-supporting plastic cores.  Once the end cap is positioned for installation around the end of a cable, the

supporting core is unwound and removed.  With the core removed, the live-memory action of the specially formulated  material

shrinks the end cap into position.  The constant radial pressure of the Cold Shrink material ensures a durable environmental seal.

The Cold Shrink material  resists abrasion, fungus, acids or alkalis, and retains its resiliency for years. 

Freezing or overheating due to ambient temperatures encountered during shipping or storage does not impair the end caps.

Removal

Once installed, the Cold Shrink End Caps can be easily removed from the cable.  Simply lift the edge of the end cap; slice the

material with a utility knife and the end cap comes off cleanly, leaving no adhesive residue or grease.

 Maintenance

Cold Shrink CS-EC Series End Caps are stable under normal storage conditions.  Normal storage and stock rotation are

recommended